Views
7 years ago

world of industries 3/2017 (EN)

world of industries 3/2017 (EN)

About Universal Robots

About Universal Robots The portfolio includes the collaborative UR3, UR5 and UR10 robotic arms. The company has experienced considerable growth with the robots now sold in more than 50 countries worldwide. The company (part of Teradyne Inc.), is headquartered in Odense, Denmark, which more 300 employees worldwide. Vision-guided collaborative robots HANNOVER MESSE Task Force Tips, a manufacturer of firefighting equipment, wanted to maximize their personnel tending machining cells into more complex tasks while keeping spindle time up and product quality consistent. The Indiana-based manufacturer has now installed four collaborative Robots delivering savings resulting in a return on their investment in only 34 days. CEO of Task Force Tips, Stewart McMillan, still remember his father looking up at him with pen in hand saying “Are you sure about this?” when the family-owned company bought their first CNC machine forty years ago. “It was a huge step. But giving people the proper tools to do their job is essential to being productive,” says McMillan, who started integrating robots with machine tools as far back as 1990. Those robots however, were dedicated to working only on the machine they were installed with and could not be redeployed to other tasks: “So what happens is the machine wears out first and now you have a 0,000 robot that you can’t do anything with. We had heard of collaborative robots that could be used in a much more flexible manner, so we decided to explore this new technology.” Production Supervisor at Task Force Tips, Cory Mack, recalls how within literally minutes of the Universal Robots demo coming in, his colleagues were already trying to figure out how to program it and make it work: “The Universal Robot is so simple and non-intimidating that our programmers were already in the mindset of I don’t need any guidance, I can do this on my own.” Flexible robots as a paradigm shift Task Force Tips installed one UR10 robot and two UR5 robots to tend CNC machines, a fourth UR5 is mounted to a table on wheels and moved between tasks. The UR robots can work collaboratively right alongside TFT employees due to a built-in safety feature causing the robots to automatically stop operating when they encounter obstacles in their route. A scenario McMillan calls “a fundamental paradigm shift”: ”A major impediment in the past to using robots was the security fencing required around the machine. The beautiful thing about the UR Robots is you don’t need all that guarding. We can roll the table with the robot right up to the machine and in a few minutes teach the robot to load parts. They become kind of a partner to a person that goes around and helps them with the drudgery.” The robot is running for 21 hours unassisted Task Force Tips has their production layout set up in a non-traditional cell format with operators running multiple machines simultaneously round the clock. Mack explains how the UR robots have reduced staffing requirements from 7 to 3 operators: “Now it only takes about one hour per operator per shift to operate the robot, which includes laying out parts and staging the robot. The robot is running for 21 hours unassisted, so we’re looking at savings of just about 34 days to pay for the robot,” says the Production Supervisor mentioning the added benefits: “That’s 7 hours of time in each shift you’re saving for that person to be off doing something else.” Two robots working in tandem Having the two UR5 robots work in tandem has also helped optimize production. As blanks arrive on an inbound conveyor, the first UR5 robot uses vision guidance to identify and pick up the blanks, then inserts the blank into the first milling machine. The UR5 then takes out the half machined part already in the lathe and hands it over to the other UR5. The second robot inserts that part into the second machine, takes out the complete machined part and places it on the outbound conveyor, where an operator places the parts onto anodizing racks, completing the cycle. It’s a process that – as Task Force Tips’ Automation Specialist Adam Hessling puts it – looks very impressive, but was deceivingly easy to do. He refers to himself as a “journeyman machinist” with no specific robotics programming experience: “My background is all in CNC programming, but I just used the Universal Robots support website and got a lot of really good information from there and wound up being able to put together the two-robot machining cell doing the hose couplings without any external help. If you understand just basic logic, you can do an unbelievable amount with Universal Robots.” 40 WORLD OF INDUSTRIES

CONTROL AND DRIVE TECHNOLOGY Handoff between the two UR5 robots looks very impressive Vision guidance required no scripting Both the robot handoff and the vision guidance use the Modbus communication protocol registers in the UR robots controller. “Using Modbus made the communication between the two robots very easy to do. Through the touchscreen that comes with the robot, we just set the way-points that we want the robots to move through and the two robots confirm back and forth to each other that they are where they are supposed to be,” explains Hessling, detailing the vision guidance: “You can have discreet inputs and outputs just like a normal PLC would have or you can do register values, which is what we use to do the coordinates for the camera. Modbus registers that it can output and we just send the coordinates to the Modbus registers in the Universal Robot’s controller that generates the way-points of the parts and directs the robot there. It didn’t involve any scripting at all,” says the TFT Automation Specialist, who calls it a very clean installation: “All of the communication we did was through our computer network, nothing is actually hard wired together.” Force detection identifies product issues When the UR5 places the unmachined part in the lathe, the robot’s force detection will identify if the part is misshapen, has some burs from the saw cut or if there are machining chips in the chuck jaws. “When the robot tries to reach the set waypoint for placement and there’s an obstruction which causes the force on the end of arm to exceed 50 N; which I programmed as the threshold, it knows something is wrong,” says Hessling who has programmed the robot to then apply an air blast to try and clean whatever debris is in the way. The robot will go through the air blast several times and if it still can’t place the part, the robot tells the machine to execute a “chuck wash” cycle, which uses the machine’s high pressure coolant system to dislodge debris from the chuck jaws. If the part still can’t load after the coolant wash, the popup appears on the robot’s touchscreen, instructing the operator to clear any debris from the chuck jaws and press continue. If the issue persists, there is another popup which halts the program entirely. The operator can then diagnose the problem, fix it, and restart production. The intuitive interface on the UR robots allow operators with no programming experience to interact and program the robots “I would estimate that the robot fixes the “failure to load” issue about three or four times per hour, which has really helped us eliminate downtime. The operator only needs to intervene about once per shift, sometimes never. This is no fault of the robots; it is just the nature of the aluminum we are machining and the type of chips it creates,” explains Hessling. Product quality increased Freeing up personnel from machine tending has also played an important role in increased product quality. “When our employees are not worried about keeping a machine running all the time, they have a lot more time to visually inspect the machined products. Part quality has really gone to a whole other level with the UR Robot in place, while allowing our personnel to come up with new ideas and better ways to improve our production,” says the TFT Production Supervisor. CEO McMillan adds: “When you set people loose with a way to reduce the mundane labor in their daily job, they find those ways.” Photographs: Universal Robots, Denmark www.universal-robots.com Measuring technology for industry and machine construction Position indicators Actuators Rotary encoders & Wire-actuated encoders Magnetic measurement HMI 2017, Hall: 9, Booth: G81 SIKO, a strong partner for industry and machine construction ■ Specialising in measuring technology since 1963 ■ Decades of experience in distance, angle & rotary measuring technology www.siko-global.com ■ ■ Individual customisation and developments for our clients International sales and support through subsidiaries or local representatives